Cork Adhesive Polymer - 5kg High-Quality Bonding Solution
Polymer-water cork adhesive 5KG is a high-quality dispersion adhesive in the form of a dense paste, used for immediate installation of all kinds of cork linings.
It contains no solvents and is practically odorless, and non-flammable.
Polymer-water cork adhesive 5KG is intended for indoor applications. This product is characterized by adhesion far exceeding the requirements of the standard, unusual flexibility characteristic for polymeric adhesives, and white color.
Use on all stable, dry, and clean building substrates, as well as on wood-based and deformable substrates, e.g. G-K or OSB boards. You must level the ground.
Apply glue straight from the bucket. We apply it using a velour roller lubricating one surface. Please clean the surface well before you put glue on it.
Terms of Service
Delivery & Returns Policy
Apply the cladding directly to the surface covered with glue, and then press with a roller so that its layer is reduced to half the thickness.
The adhesive binds as a result of the evaporation of water.
Works should be carried out at ambient and substrate temperatures from 8 ° C to 30 ° C.
Drying time: 24h (20 C) – depends on the absorbency of the substrate
Open working time: approx. 10 min. (20 degrees C)
Close the bucket tightly for reuse. To make the consistency of plastic, we recommend mixing the product before use. Shelf life 12 months. Cleaning of tools – with water immediately after use.
Capacity: 5 kg
Adhesive consumption: when using a roller: 0.5 kg per 1m2 (10.76sqft)
Texture: Thixotropic paste
Apply the glue straight from the bucket. Spread with a 1-4mm notched trowel or with a roller.
For thin coverings, e.g. up to 3 mm, apply with a roller and glue immediately.
With thicker plugs: a 4.5.6 mm notched trowel with a 2 mm tooth will be more comfortable.
while 7,8,10mm – a trowel with teeth 3-4mm.